Products Under Indian Standards For Preparation Of Guidance Documents

Jan 08, 2024
Certification
Products Under Indian Standards For Preparation Of Guidance Documents

www.bis.gov.in

Products Under Indian Standards For Preparation Of Guidance Documents

 

Sl.

No.

Name of

Product Or Product Group

Principal Indian Standard(s)

(see NOTE at the end of list)

IS No.

Title

Civil Engineering Department

1.

Ceramic Tiles

4457 : 2007

Ceramic unglazed vitreous acid resisting tiles

15622 : 2017

Pressed ceramic tiles

        2.

Precast Concrete Products

15658 : 2021

Concrete paving blocks

1237 : 2012

Cement concrete flooring tiles

13801 : 2013

Chequered cement concrete tiles

458 : 2021

Precast concrete pipes (with and without reinforcement)

1332 : 1986

Precast reinforced concrete street lighting poles

2193 : 1986

Precast pre-stressed concrete street lighting poles

5758 : 2020

Precast concrete kerbs, channels, edging, guadrants and other associated fittings

12592 : 2002

Precast concrete manhole over and frome

2185 : Part 1 : 2005

Concrete masonry unit – Hollow and solid concrete blocks

2185 : Part 2 : 1983

Concrete masonry units – Hollow and solid lightweight concrete blocks

218 : Part 3 : 1984

Concrete masonry units – Autoclave cellular aerated concrete blocks

2185:Part4:2008

Concrete masonry units – preformed foam cellular concrete blocks

12440 : 1988

Precast concrete stone masonry blocks

16720 : 2018

Pulverized fuel ash-cement bricks

5820 : 1970

Precast concrete cable covers

2174 : 1962

Reinforced concrete dust bins

4996 : 1984

Reinforced concrete fence posts

6523 : 1983

Precast reinforced concrete door and window frames

       3.

Helmets

4151 : 2015

Protective helmet for two wheeler riders

       4.

Steel bar and wires for concrete reinforcement and Prestressing steel

432 : Part 1 : 1982

Mild steel and medium tensile steel bar and hard-drawn steel wire for concrete reinforcement mild steel and medium tensile steel bars 

432: Part 2 :

1982

Mild steel and medium tensile steel bars and hard- drawn steel wire for concrete reinforcement Hard-

drawn steel wire

1566: 1982

: 1982

Hard-drawn steel wire fabric for concrete reinforcement

1785: Part 1 :

1983

Plain hard-drawn steel wire for pre-stressed concrete -Cold-drawn stress relieved wire

1785 : Part 2 :

1983

Plain hard drawn steel wire for pre-stressed-concrete as-drawn wire

1786 : 2008

High strength deformed steel bars and wires for concrete renforcement

2090 : 1983

High tensile steel bars used in pre-stressed concrete

Indented wire for pre-stressed concrete

6006 : 2014

Uncoated stress relieved strand for pre-stressed concrete

13620 : 1993

Fusion bonded epoxy coated reinforcing bars

14268 : 2017

Uncoated stress relieved low relaxation seven wire (ply) strand for pre-stressed concrete

16172 : 2014

Reinforcement couplers for mechanical splices of bars in concrete

16651 : 2017

High strength deformed stainless steel bars and wires for concrete reinforcement.

16644 : 2018

Stress-relieved low relaxation steel wire for pre- stressed concrete

        5.

Plywood

303 : 1989

Plywood for general purposes

710 : 2010

Marine plywood

1328 : 1996

Veneered decorative plywood

4990 : 2011

Plywood for concrete shuttering works

5509 : 2000

Fire retardant plywood

5539 : 1969

Preservative treated plywood

709 : 1974

Medium strength aircraft plywood

4859 : 1968

High strength aircraft plywood

7316 : 1974

Decorative plywood using plurality of veneers for decorative faces

13957 : 1994

Metal faced plywood

10701 : 2012

Structural plywood

15791 : 2007

Museum plywood

        6.

Plastic Pipes and Fittings

4984: 2016

Polyethylene pipes for water supply

4985 : 2021

 

Un-plasticized PVC pipes for potable water supplies

7834 : Part 1:

1987

Injection moulded PVC socket fittings with solvent cement joints for water supplies

7834 : Part 2 :

1987

Injection moulded PVC socket fittings with solvent

cement joints for water supplies-45 degree elbows

7834 : Part 3 : 1987

Injection moulded PVC socket fittings with solvent

cement joints for water supplies 90 degree elbows

7834 : Part 4 :

1987

Injection moulded PVC socket fittings with solvent

cement joints for water supplies 90 degree tees

7834 : Part 5

: 1987

Injection moulded PVC socket fittings with solvent

cement joints for water supplies-45 degree tees

7834: Part 6 :

1987

Injection moulded PVC socket fittings with solvent

cement joints for water supplies - Sockets

7834: Part 7 :

1987

Injection moulded PVC socket fittings with solvent

cement joints for water supplies Unions

7834 : Part 8 :

1987

Injection moulded PVC socket fittings with solvent

cement joints for water supplies-Caps

8008 : Part 1

: 2003

Injection moulded machined high density

polyethylene (HDPE) fittings for potable water

supplies-Fittings

8008 : Part 2: 2003

Injection moulded machined high density

polyethylene (HDPE) fittings for potable water-

90degree bend

8008 : Part 3 :

2003

Injection moulded machined high density

polyethylene (HDPE) fittings for potable water Supplies 90degree tees

8008: Part 4: 2003

Injection moulded machined high density polyethylene (HDPE) fittings for potable water -

Reducers

8008 Part 5 2003

Injection moulded machined high density

polyethylene (HDPE) fittings for potable water supplies-Ferrule reducers

8008 Part 6: 2003

Injection moulded machined high density

polyethylene (HDPE) fittings for potable water

supplies-Pipe ends

8008: Part 7:

2003

Injection moulded machined high density

polyethylene (HDPE) fittings for potable water supplies Sandwich flanges

8008: Part 8: 2003

Injection moulded machined high density polyethylene (HDPE) fittings for potable water

supplies-Reducing tees

8008 : Part 9 : 2003

Injection moulded machined high density polyethylene (HDPE) fittings for potable water

supplies ends caps

8360 : Part 1:

1977

Fabricated high density polyethylene (HDPE) fittings for potable water supplies

8360: Part 2

1977

Fabricated high density polyethylene (HDPE) fittings for potable water supplies 90 degree tees

8360 : Part 3

: 1977

Fabricated high density polyethylene (HDPE) fittings for potable water supplies 90 degree bends

9271: 2004

Un-plasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage

10124: Part 1 : 2009

Fabricated PVC-U fittings for potable water supplies

10124: Part 2:

2009

Fabricated PVC-U Fittings for potable water supplies

-Sockets

10124 : Part 3 :

2009

Fabricated PVC-U fittings for potable water supplies-Straight reducers

10124 : Part 4 : 2009

Fabricated PVC-U fittings for potable water supplies

-Caps

10124: Part 5: 2009

Fabricated PVC-U fittings for potable water supplies-Equal tees

10124 : Part 6 :

2009

Fabricated PVC-U fittings for potable water supplies -Flanged tail pieces with metallic flanges

10124: Part 7: 2009

Fabricated PVC-U fittings for potable water supplies -Threaded adaptors

10124 : Part 8 :

2009

Fabricated PVC-U fittings for potable water supplies-90 degree bends.

10124 : Part 9:

2009

Fabricated PVC-U fittings for potable water supplies -60 degree bends

10124 : Part 10:

2009

Fabricated PVC-U fittings for potable water supplies 45 degree bends

10124 : Part 11: 2009

Fabricated PVC-U fittings for potable water supplies-40 degree bends

10124 : Part 12  : 2009

Fabricated PVC-U fittings for potable water supplies 225 degree bends

10124 : Part 13: 2009

Fabricated PVC-U fittings for potable water supplies -11% O bends

12231 : 1987

Un-plasticized PVC pipes for use in suction and delivery lines of agricultural pump sets

12709 : 1994

Glass-fibre reinforced plastic (GRP) pipes jomts and fittings for use for potable water supply

12818 : 2010

Un-plasticized polyvinyl chloride (PVC-U) screen and casing pipes for bore/tube wells

13592 : 2013

Un-plasticized polyvinyl chloride (PVC-U) pipes for soil and waste discharge system inside and outside buildings including ventilation and rainwater system

13593 : 1992

UPVC pipe fittings to be used with the (UPVC) pipes in the suction and delivery lines of agricultural pumps

14333 : 1996

High density polyethylene pipe for sewerage

14402 : 1996

Glass fibre reinforced plastics (GRP) pipes, joints and fittings for use for sewerage, industrial waste and water (other than potable)

14735 : 1999

Un-plasticized polyvinyl chloride (UPVC) injection moulded fittings for soil and waste discharge system for inside and outside buildings including ventilation and rain water system.

14787 : 2000

Un-plasticized PVC pipes (ducts) and fittings for underground telecommunications cable installation

14885 : 2001

Polyethylene pipes for the supply of gaseous fuels

15265 : 2003

Flexible PVC pipes or polymer reinforced thermoplastic hoses for suction and delivery lines of agricultural pumps

15328 : 2003

Un-plasticized non-pressure polyvinyl chloride (PVC -U) pipes for use in underground drainage and sewerage systems

15445 : 2010

Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies

15778 : 2007

Chlorinated polyvinyl chloride (CPVC) pipes for potable hot and cold water distribution supplies

15801 : 2019

Polypropylene Random copolymer pipes for hot and cold water supplies

15927 : Part : 1 2012

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Fittings for socket fusion using heated tools

15927 : Part 2 : 2012

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Spigot fittings for butt fusion for socket fusion using heated tools and for use with electro fusion fittings

15927 :  Part 3 : 2011

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Electro fusion. fittings

16647 : 2017

Oriented un-plasticized polyvinyl chloride (PVC-0) pipes for water supply

      7.

Gypsum Building Products

2095 : Part 1 : 2011

Gypsum plaster boards-Plain gypsum plaster boards

2095: Part 2: 2001

Gypsum plaster boards plaster boards

2095: Part 3:

2018

Gypsum plaster boards Reinforced gypsum plaster boards, tiles, cornices and mouldings

2547:Part 1:1976

Gypsum building plaster lightweight plasters

2547: Part 1:1976

Gypsum building plaster lightweight plasters

2547: Part 2:

1976

Gypsum building plasters Premixed lightweight plasters

2849: 1983

Non-load bearing gypsum partition blocks (solid and hollow types)

8272: 1984

 

Gypsum plaster for use in the manufacture of fibrous plaster boards

17400: 2021

Glass fibre reinforced gypsum panels

      8.

Fire Extinguishers

15683 : 2018

Portable fire extinguishers performance and construction

16088 : 2012

Chlorinated polyvinyl chloride (CPVC) pipes for automatic sprinkler fire extinguishing system

11833 : 1986

Dry powder fire extinguisher for metal fires

14951 : 2001

Fire extinguisher 145 litres capacity mechanical foam type

CHEMICAL DEPARTMENT

9.

Writing & Printing Paper Products

1848: Part 1:

2018

Writing and printing papers Account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendared and typewriting types

1848: Part 2 2018

Writing and printing papers Air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi poster machine glazed types

12766: 1997

Computer paper

14490:2018

Plain copier paper

10.

Paper Based Food Packaging

8113 : 1976

Primary cartons for packaging butter

9988: 1981

Waxed paper for bread and biscuits

7162: 1973

Waxed cartons for packaging of ice-cream.

14319 1995

Laminated paper board pack for vanaspati

10177: 1982

Ice cream cups and lids

11.

Soaps & Dete`rgents

2888: 2004

Toilet soap

4199 2001

Toilet soap, liquid

11479: Part 1: 2001

Antibacterial toilet soap Solid cake

11479 Part 2

2020

Antibacterial toilet soap Liquid

4955: 2020

Household laundry detergent powders

4956: 2020

Synthetic detergents for industrial purposes

8180:2020

Household laundry detergent bars

9458: 2020

Synthetic detergents for washing woollen and silk fabrics

12.

Protective Footwear

15298: Part 2:

2016

Personal protective equipment Safety footwear

15298 Part 3 2019

Personal protective equipment Protective footwear

15298 : Part 4: 2017

Personal protective equipment Occupational  footwear

3976: 2018

Safety rubber canvas boots for miners

5557 Part 2

2018

All rubber gum boots and ankle boots Occupational purposes

13.

Enamel and Primer for Paint

12744: Part 1:

2013

Ready mixed paint air drying red oxide Zine phosphate priming for domestic and decorative applications

2074: Part 1:

2015

Ready mixed paint air drying red oxide Zune

clirome priming for domestic and decorative applications

2932: Part 1

2013

Enamel, synthetic, exterior (a) undercoating (b)

finishing for domestic and decorative applications

2933 : Part 1:

2013

Enamel, exterior (a) undercoating (b) finishing-for

domestic and decorative applications

133: Part 1

:2013

Enamel, interior (a) undercoating (b) finishing for

household and decorative purposes

13238 : 1991

Epoxy based zinc phosphate primer two pack.

 

14.

Water Treatment Chemicals for treatment of water intended for drinking

15573: 2018

Polyaluminium chloride

1065 : Part 2 2019

Stable bleaching powder for treatment of water intended for drinking

11673 :Part 2: 2019

Sodium hypochlorite solution

Water treatment use

9825 : 2003

Chlorme tablets

15.

Shoe Polish Products

1746: 1992

Shoe polish, paste

12010 : 1987

Shoe polish, liquid

10025 : 1981

Polish, liquid (white), for canvas footwear

ELECTROTECHNICAL DEPARTMENT

16.

Distribution

Transformers

1180: Part 1:

2014

Outdoor/indoor type oil immersed distribution transformers up to and including 2500 kVA, 33kV-

Mineral oil immersed

1180: Part 3:

2021

Outdoor/indoor type liquid immersed distribution transformers up to and including 2 500 kVA, 33kV

Natural/synthetic organic ester immersed

17.

Ceiling Fans and Fan Reulators

374 : 2019

Electric ceiling type fans

11037: 2019

Electronic type fan regulators

18.

Circuit Breakers

IS/TEC 60898 Part 1 2015

Circuit-breakers for overcurrent protection for household and similar installations breakers for a.c. operation

Circuit

19.

Flameproof Enclosures

IS/IEC 60079: Part 1: 2014

Explosive atmospheres Equipment protection by flameproof enclosures

20.

Three Phase and Single Phase a c Motors

12615:2018

Line operated three phase a.c. motors (IE CODE) efficiency classes and performance

996: 2009

Single phase a. c. induction motors for general purpose

21.

Plugs, Socket and Switches

1293: 2019

Plugs and socket-outlets for household and similar purposes of rated voltage up to and including 250 V and rated current up to and including 16 A

3854: 1997

Switches for domestic and similar purposes

22.

PVC Cables.

694:2010

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 V

1554: Part 1: 1988

PVC insulated (heavy duty) electric cables for working voltages up to and including 1100 V

23.

Geyser

2062 : 2018

Stationary storage type electric water heaters

302: Part 2: Sec 21:2018

Safety of household and similar electrical appliances Stationary storage type

Particular requirements electric water heaters

24.

Electrical Energy Meters

13779-2020

AC static watihour meters, class 1 and 2

16444 Part 1 2015

AC static direct connected watthour smart meter class 1 and 2

25.

LED bulbs

16102: Part 1: 2012

Self ballasted LED lamps for general lighting

services-Safety requirements

16102 Part 2 : 2017

Self ballasted LED lamps for general lighting services Performance requirements

26.

LED Modules

16103: Part 1 : 2012

LED modules for general lighting Safety requirements

16103: Part 2: 2012

LED modules for general lighting

Performance requirements

27.

Luminaires

IS 10322 : Part 1 : 2014

Luminaires General requirements and tests.

IS 10322 Part 5 sec 1: 2012

Luminaires Fixed general purpose luminaires

IS 10322 Part 5

Sec 2: 2012

Luminaires Recessed luminaires

IS 10322 Part 5 : Sec 3: 2012

Luminaires Luminaires for road and street lighting

IS 10322 Part 5 Sec 4: 1987

Luminaires-Portable general purpose luminaires

IS 10322 Part 5 Sec 5: 2013

Luminaires-Floodlights

 

IS 10322 Part 5 Sec 6: 2013

Luminaires Handlamps

 

IS 10322 Part 5 : Sec 7: 2017

Luminaires - Lighting chains

IS 10322 Part 5 Sec 8: 2013

Luminaires Emergency lighting

 

IS 10322 Part 5 Sec 9: 2017

Luminaires Rope lights

 

FOOD & AGRICULTURE DEPARTMENT

28.

Salts

253: 2014

Common salt

7224: 2006

Iodized salt, vacuum evaporated iodized salt and

refined iodized salt

12981: 1991

Common salt-Iron fortified

28

Poultry feeds

1374 : 2007

Poultry feeds

29.

Poultry feeds

1374 : 2007

Compounded feeds for cattle

30.

Compounded feeds for cattle

2052 : 2009

Reverse osmosis (RO) based point-of-use (POU)

water treatment system

31.

Water Purification System

9020:2002

Power threshers - Safety requirements

32.

Power Thresher

12207 : 2019

Agricultural tractors Recommendations on selected-performance characteristics

33.

Agricultural

Tractors

8268: 2001

Rhizobium inoculants

34

Bio fertilizers

9138 2009

Azotobacter spp. inoculants

14806: 2000

Azospirillum inoculants

14807 : 2000

Phosphate solubilizing bacterial inoculant (PSBI)

15849: 2009

Phosphate solubilizing fungal moculants - Aspergillus awamori

17134 2020

Bio fertilizer Liquid based rhizobium inoculants

17135:2019

Bio fertilizer Liquid based azotobacter spp- inoculants

17136: 2019

Bio fertilizer Liquid based azospirillum inoculants

17137 : 2019

Bio fertilizer Liquid based phosphate solubilizing

bacterial inoculants (PSBI

35.

Jaggery

12923 : 1990

Cane gur (jaggery)

13952: 2018

Palm jaggery (gur)

36

Power Tiller

1353 : 2018

Power tiller

Recommendations on selected

performance and other characteristics

37.

Combine Harvester

15806: 2018

Combine harvester Recommendations on selected performance and other characteristics

38.

Irrigation Equipment

12786-1989

Irrigation equipment Polyethylene pipes for irrigation laterals

 

 

14606: 1998

Irrigation equipment Media filters

13487: 1992

Irrigation equipment Emitters

13488-2008

Irrigation equipment Emitting pipe systems

14482: 1997

Irrigation equipment Polyethylene micro tubes for drip urigation

14743 1999

Irrigation equipment Hydrocyclone filters

12785: 1994

Irrigation equipment Strainer-type filters

14483: Part 1: 1997

Fertilizer and chemical injection system Venturi injector

14483 Part 2: 2002

Fertilizer and chemical injection system. Water- driven chemical injector pump

14483: Part 3

2018

Fertilizer and chemical injector system Fertilizer tank

12232 Part 1 1996

Irrigation equipment Rotating sprinkler Design and operational requirements

17425: 2020

Irrigation equipment Quick coupled polyethylene pipes and fittings for sprinkler irrigation systems

17411 : Part 2: 2020

Agricultural irrigation equipment Filters for micro irrigation Strainer-type filters and disc filters

39.

Fish feed

16150: Part 1:

2014

Fish feed

Carp feed

16150: Part 2:

2014

Fish feed-Catfish feed

16150 :  Part 3 : 2014

Fish feed-Marine shrimp feed

16150: Part 4: 2014

rosenbergii) feed

40.

Fertilizers

294: 2018

Single superphosphate

826: 2018

Ammonium sulphate, fertilizer grade

2764 : 2018

Potassium sulphate, fertilizer grade

2779 : 2018

Potassium chloride (muriate of potash), fertilizer

grade

5406 : 1979

Urea, fertilizer grade

6448 : 2018

Diammonium phosphate

ELECTRONICS AND INFORMATION TECHNOLOGY DEPARTMENT

41.

Hearing aid

10775: 1984

Body level hearing aids

16127: 2013

Behind the ear (BTE) hearing ands-Digital

 

 

 

42.

Camera

Give it a try

Devices for Video Surveillance System

16910 Part 5

2020

Video surveillance systems for use in security applications Data specifications and image quality performance for camera devices

43.

Optical Fibre Cables

16939: 2018

Optical fibre cables for inside premises (FTIX) application

17046: 2018

Fibre optic cable for cable TV application

44.

Coaxial Cables

IS/IEC 61196:

Part 3 Sec l : 1995

Radio-frequency cables Coaxial cables for digital communication in horizontal floor wiring Detail specification for cables of 500 m reach and up to 10 Mb/s

IS/IEC 61196:

Part 3: Sec 2:

1997

Radio-frequency cables Coaxial cables for digital communication in horizontal floor wiring Detail

specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s

IS/IEC 61196: Part 3: Sec 3

1997

Radio-frequency cables Coaxial cables for digital communication in horizontal floor wiring Detail specification for coaxial cables with foamed dielectric

for local area networks of 185 m reach and up to 10 Mb/s

IS/IEC 61196:

Part 6: Sec 1:

2009

Coaxial communication cables-CATV drop cables Blank detail specification

IS/IEC 61196 Part 6 Sec 2: 2020

Coaxial communication cables CATV drop cables 75-4 type cables

IS/IEC 61196:

Part 6: Sec 3: 2020

Coaxial communication cables CATV drop cables -75-5 type cables

IS/IEC 61196 Part 6 Sec 4:

2020

Coaxial communication cables-CATV drop cables 75-7 type cables

IS/IEC 61196 Part 8: Sec 1:

2012

Coaxial communication cables Semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric

-Blank detail specification

IS/IEC 61196:

Part 8 Sec 2 2012

Coaxial commmmication cables Semi-flexible cables with solid polytetrafluoroethylene (PTFE)

insulation-50-047 type

IS/IEC 61196:

Part 8: Sec 3: 2012

Coaxial communication cabies Semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation-50-086 type

IS/IEC 61196:

Part 8: Sec 4: 2012

Coaxial communication cable Semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation 50-141 type

PRODUCTION AND GENERAL ENGINEERING DEPARTMENT

45.

Ball Bearings

6455:2020

Single row deep groove ball bearings

46.

 

1783: Part 1: 2014

Drums large, fixed ends Grade A drums

1783: Part 2: 2014

Drums large, fixed ends Grade B drums

13997: 2014

Drums, large open top

47.

Assembly Hand Tools for Screws And Nuts

2029: 1998

Ring wrenches (spanners)

3650 1981

Combination side cutting pliers

4003: Part 1: 1978

Pipe wrenches General purpose

4003: Part 2: 1986

Pipe wrenches Heavy duty

48.

 

6590: 1972

Braided nylon rope for mountaineering purposes

8533: 1977

General purpose carabineers for mountaineering

49

 

551: 2018/ISO 525-2013

Bonded abrasive products

50.

Height Measuring Instruments

17583: 2021

Stadiometer

17582: 2021

Infantometer

51.

Weighing Scale

16514 : Part 2 2019

Non-automatic weighing instruments Metrological and technical requirements

MECHANICAL ENGINEERING DEPARTMENT

52.

Air Conditioning

1391 : Part 2: 2018

Room air conditioners

Split air conditioners

8148: 2018

Ducted and package air conditioners

16590 : 2017

Water cooled chilling packages using the vapour compression cycle

IS/IEC 60335:

Part 2: Sec 40

2018

Household and similar electrical appliances safety- Particular requirements for electrical heat pumps air- conditioners and dehumidifiers

3315:2019

Evaporative air coolers (desert coolers)

16753: Part 1:

2018/ISO

29463 : 1:2011

High efficiency filters and filter media for removing particles in air

53

Refrigeration

17550: Part 1

2021

(Under print)

Household refrigerating appliances

1475: Part 1

2001

Self contained drinking water coolers

2167:2019

Bottle coolers

7872:2020

Deep freezers

2370 2014

Walk-in cold rooms

11328: 1985

Self-contained automatic ice makers

16672: Part

2:2017: ISO/

23953 : 2: 2015

Refrigerated display cabinets

IS/IEC : 60335

Part 2: Sec 89 :

2010

Household and similar electrical appliances Safety

Commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor

54.

Pumps

1710:2021

Vertical turbine pumps

5600: 2002

Pumps Sewage and drainage

5639 1970

Pumps handling chemicals and corrosive liquids

5659 1970

Pumps for process wafer

6536: 1972

Pumps for handling volatile liquids

6595: Part 1:

2018

Horizontal centrifugal pumps for clear, cold water -Agricultural and rural water supply purposes

6595 Part 2:

1993

Horizontal centrifugal pumps for clear, cold water- General purpose (other than agricultural and rural water supply)

6596: 1972

Pumps for handling paper stock

8034 2018

Submersible pump sets

84181999

Pumps Centrifugal self-priming

9079: 2018

Moonset pumps for clear, cold water for agricultural and water supply purposes

9201 1987

Horizontal centrifugal moonset pumps for clear, cold, fresh water

10805: 1986

Foot-valves, reflux valves or non-return valves and bore valves to be used in suction lines of agricultural. pumping systems

11501: 1986

Engine moonset pumps for clear, cold, fresh water for agricultural purposes

12225: 1997

Centrifugal jet pump

12469 2019

Pumps for stationary firefighting installations

14220 2018

Open well submersible pump sets

14263: 1995

Tapers for agricultural pumping systems

15657: 2006

Centrifugal pumps for petroleum, petrochemical and natural gas industries

17018: Part 1: 2018

Solar photovoltaic water pumping systems Centrifugal pumps

55.

Security Equmanent Safes & Vaults

550: Part 1:

2014

Safes

11188: Part 1: 2014

Vault (strong room) doors

56.

Gas Burning Appliances

4246: 2002

Domestic gas stoves for use with liquefied petroleum. gases

17153: 2019

Domestic gas stoves for use with piped natural gas (PNG)

17150 :2019

Mini domestic water heater for use with piped natural gas (PNG)

15558: 2005

Mini domestic water heater for use with LPG

8749:2002

Biogas stove

57.

Utensils

2347:2017

Domestic pressure cooker

17526-2021

Domestic stainless steel vacuum flask/bottle.

14756-2017

Stainless steel cookware

58.

Gas Cylinders

3196: Part 1:2013

Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases-Cylinders for liquefied petroleum gases (LPG)

3196: Part 2: 2006

Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable Cylinders for liquefiable non-toxic gases other than LPG

3196: Part 4:

2001

Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases Cylinders for toxic and corrosive gases

4152: 2011

Seamless carbon dioxide cylinders for firefighting purposes on board ship

7142: 1995

Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity

7285 : Part 1: 2018

Refillable seamless steel gas cylinders Normalized

steel cylinders

7285 : Part 2 :2017

Refillable seamless steel gas cylinders Quenched. and tempered steel cylinders with tensile strength less than 100 MPa (112 Kgf/mm²)

7312 : 2018

Welded and seamless steel dissolved acetylene gas cylinders

8471 : 2003

Acetylene generators

14899 : 2014

Liquefied petroleum gas (LPG) containers for automotive use

15490 : 2017

Seamless steel cylinders for on-board storage of compressed natural gas as a fuel for automotive vehicles

15637 : 2006

Welded stainless steel cylinders for liquefied petroleum gases (LPG) from 0.5 lire to 250 litre water capacity

15935 : 2021

Composite cylinders for on board storage of compressed natural gas (CNG) as a fuel for automotive vehicle

16735:2018

Cylinders for on-board storage of compressed gaseous hydrogen and hydrogen bleuds as a fuel for automotive vehicles

59.

Safety of Machinery

16819: 2018

Safety of machinery General principles for design Risk assessment and risk reduction.

MEDICAL EQUIPEMENT AND HOSPITAL PLANNING DEPARTMENT

60.

Rigid Bronchoscope S

15732: Part 2: 2019/ISO 8600 : 2:2015

Rigid bronchoscopes

61.

Embalming Machine

17534: 2021

Embalming machine

62.

Intraocular lenses

IS/ISO 11979 :

Part 8 2006

Ophthalmic implants Intraocular lenses

63.

Foci meter

IS/ISO 8598 :

Part 1 2014

Optics and optical Instruments-Focimelers

64.

Tonometer

IS/ISO 8612 : 2009

Ophthalmic instruments Tonometer's

65.

Ophthalmoscope

IS/ISO 10942:2006

Ophthalmic instruments Direct ophthalmoscopes

66.

Joint Replacement Implants

IS/ISO 21534: 2007

Non-active surgical implants Joint replacement implants

67.

Otoscope

17407:2020

Digital otoscope-Handheld type

68.

Neurological Shunts

IS/ISO 7197: 2006

Neurological implants Sterile, single use

hydrocephalus shunts and components

69.

Centrifugal Blood Pumps

IS/ISO 18242:

2016

Cardiovascular implants and extracorporeal systems Centrifugal blood pumps

METALLURGICAL ENGINEERING DEPARTMENT

70.

Steel Tubes, Pipes & Fittings

1239 : Part 1 :

2004

Steel tubes, tubulars and other wrought steel fittings- Steel tubes

3601:2006

Steel tubes for mechanical and general engineering purposes

3589-2001

Steel pipes for water and sewage (168.3 to 2540 mm outside diameter)

4270:2001

Steel tubes used for water wells

1161: 2014

Steel tubes for structural purposes

4923: 2017

Hollow steel sections for structural use

5504: 1997

Spiral welded pipes

IS/ISO 3183: 2012

Petroleum and natural gas industries Steel pipe for pipeline transportation systems

1239 Part 2: 2004

Steel tubes, tubulars and other steel fittings Steel pipe fittings

6392 2020

Steel pipes flanges

71.

Coated Plain Carbon Steel

15965: 2012

Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (plain)

14246: 2013

Continuously pre-painted galvanized steel sheets and coils

12591: 2018

Cold-reduced tin mill products Electrolytic

chromium/chromium oxide Coated steel

1993: 2018

Cold-reduced tin mill products-Electrolytic tiuplate

72.

Welding Electrodes

814: 2004

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel

1395: 1984

Covered electrodes for manual metal are welding of stainless steel and other similar high alloy steels

5206 1983

Covered electrodes for manual metal are welding of cast iron

5857:1970

Nickel and nickel alloy bare solid welding rods and electrodes

15769:2008

Flux cored (tubular) electrodes for gas shielded and self-Shielded metal welding of carbon or carbon Manganese steel

5511:1991

Covered electrodes for manual metal are welding of cast iron

8736:1977

Nickel and nickel alloy covered electrodes for metal arc welding

8666:1977

Copper and copper alloy covered electrodes for manual metal arc welding

6419 : 1996

Welding rods and bare electrodes for gas shielded arc welding of structural steel

8363: 1996

Bare wire electrodes for electro slag welding of steels

73.

Copper Products

12444:2020

Copper wire rods for electrical applications

9713: 1983

Hot -rolled electrolytic copper wire rods for electrical conductors

613 2000

Copper rods and bars for electrical purposes

1897:2008

Copper strip for electrical purposes

14340: 1996

Brass for current carrying parts in electrical wiring accessories

10773: 1995

Wrought copper tubes for refrigeration and air-

conditioning purposes

14810: 2000

Copper tubes for plumbing

407:1981

Brass tubes for general purposes

2501 : 1995

Solid drawn copper tubes for general engineering purposes

1545-1994

Solid dravu copper and copper alloy tubes for condensers and heat exchangers

74.

Stainless Steel Products

6527 : 1995

Stainless steel wire rods

6528: 1995

Stainless steel wire

4454 Part 4: 2001

Steel wires for mechanical springs stamless steel

wire

9294 : 1979

Cold-rolled stainless steel strips for razor blades

9516 : 1980

Heat resisting steels

6913: 1973

Stainless steel tubes for the food and beverage industry

11169 Part 2: 1989

Steels for cold heading/cold extrusion applications Stainless steels

6911: 2017

Stainless steel plate, sheet and strip

5522 : 2014

Stainless steel sheets and strips for utensils

15997: 2012

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances

75.

Fireclay Refractories

6:1983

Moderate heat duty fireclay refractories, group 'A

8 : 1994

High heat duty fireclay refractories

9010: 1978

Super heat duty fireclay refractories

2043 : 1984

Siliceous fireclay refractories

4564: 1968

Fireclay nozzles

4565 : 1968

Fireclay stoppers

1751: 1984

Fireclay cupola refractories

76.

Silica Refractories

4812: 1996

Silica refractories for coke oven

484: 1980

Silica refractories for general purposes

1292 1991

Silica mortar for laying silica bricks in furnaces

77.

Wire Rods and Wires of carbon steels

279 : 1981

Galvanized steel wire for telegraph and telephone purposes

280: 2006/ ISO : 7900

Mild steel wire for general engineering purposes

1673: 1984

Mild steel wire, cold heading quality

1812 : 1982

Carbon steel wire for the manufacture of wood screws

1835: 1976

Round steel wire for ropes

2255 : 1977

Mild steel wire rod for the manufacture of machine screws (by cold heading process)

2589: 1975

Hard drawn steel wire for upholstery springs

3975: 1999

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables

4223 : 1975

Steel wire for umbrella ribs

4224: 1972

Steel wire for staples, pins and clips

4454 Part 1: 2001

Steel wire for mechanical springs Cold drawn unalloyed steel wire   

4454: Part 2: 2001

Steel wire for mechanical springs-Oil hardened and tempered steel wire

4454 : Part 4 : 2001

Steel wires for mechanical springs Stainless steel

4824-2006

Bead wire for tyres

4882: 1979

Low carbon steel wire for rivets for use in bearing industry

6902: 1973

Steel wire for spokes

7557: 1982

Steel wire (up to 20 mm) for the mamfacture of cold- forged rivets

7887 : 1992

Mild steel wire rod for general engineering purposes

7904: 2018

High carbon steel wire rods

8510: Part 1 to 3 : 1977

Tinned steel wire for banding of armatures and rotors

8564: 1977

Steel wire for nipples for spokes

8565: 1977

Heald wire

8566: 1977

Steel wire for reeds

12262: 1988

Trapezoidal steel wire for spring washers

107941984

Mild steel wire for cotter pins

78.

Cast Iron Products

1536:2001

Centrifugally cast iron pressure pipes for water gas and sewage

1729:2002

Cast iron/ductile iron drainage pipes and fittings for over ground non-pressure pipe line socket and spigot series

8329 : 2000

Centrifugally cast ductile iron pressure pipes for water gas and sewage

15905: 2011

Hub less centrifugally cast iron pressure pipes fittings and accessories

9523:2000

Ductile iron fittings for pressure pipes for water gas and sewage

1879 : 2010

Malleable cast iron pipe fittings

13382:2018

Cast iron specials for mechanical anical and push-on flexible joint for pressure pipeline for water gas and sewage

9139: 1979

Malleable iron shots and grit for use in foundry

3989 : 2009

Centrifugally cast iron spigot and socket soil waste ventilating & rain water pipes fittings and accessories

79.

Aluminium Products

737: 2008

Wrought aluminnan and aluminium alloy sheet and strip for general engineering purposes

15392: 2003

Aluminium and aluminium alloy bare foil for food packaging

738: 1994

Wrought aluminium alloys, drawn tube for general engineering purposes

7092: Part 1

1992

Aluminium alloy tubes for irrigation purposes Welded tubes

733-1983

Wrought aluminium and aluminum alloy bars, rods and sections (for general engineering purposes)

6754: 1972

Aluminium alloy ingots for bearings

11890: 1987

High purity primary aluminium ingots for remelting

for special applications

617: 1994

Cast aluminium and its alloys Ingots and castings

for general engineering purposes

2590: 1987

Primary aluminium ingots for remelting for general engineering purposes

2590: 1987

Primary aluminium ingots for remelting for general engineering purposes

TRANSPORT ENGINEERING DEPARTMENT

80.

Bicycle

16314: 2015

Cycle Bicycle for general-purpose

81.

Pallets

17427:2020

Wooden (timber) pallets for packaging, storage and transportation

16058: 2013

Dunnage pallets made from recycled plastic wastes for warehousing applications

82.

Diesel Engine

10001: 1981

Performance requirements for constant speed. compression ignition (diesel) engines for general purposes (up to 19 kW)

10002: 1981

Performance requirements for constant speed compression ignition (diesel) engines for general purposes (above 19 kW)

11170: 1985

Performance requirements for constant speed. compression ignition (diesel) engines for agricultural purposes (up to 19 kW)

83.

CNG Fuel System

15711: 2006

Performance and general test methods

84.

Wheels for Automotive Vehicles

9436 : 2018

Performance requirements and methods of tests for wheels/rims for trucks

9438:2018

Automotive vehicles wheel rims for two and three wheeled vehicles-Light alloy wheel rims

16192: Part 1: 2014

Automotive vehicles wheel rims for two and three wheeled vehicles Sheet metal wheel rims

16192 : Part 2: 2014

Automotive vehicles wheel rims for two and three wheeled vehicles Spoke wheel rims

16192 : Part 3 2018

Automotive vehicles Pneumatic tyres for two and three Wheeled motor vehicles

15627: 2005

Automotive vehicles Pneumatic tyres for passenger car vehicles Diagonal and radial ply

15633:2005

Automotive vehicles Pneumatic tyres for commercial vehicles Diagonal and radial ply

15636: 2012

Automotive vehicles Tubes for pneumatic tyres

13098: 2012

Automotive vehicles Tubes for pneumatic tyres

9168 : 2018

Flaps for all rubber pneumatic tyres for automobiles

85.

Springs

7906: Part 1: 1997

Helical compression springs Design and calculation for springs made from circular section wire and bar

7906: Part 2: 1975

Helical compression springs Cold coiled springs made from circular section wire and bar

7906: Part 3: 1975

Helical compression springs Data sheet for specifications for springs made from circular section. wire and bar

7906: Part 4: 1987

Helical compression springs Selection of standard cold coiled springs made from circular section wire and bar

7906: Part 5 : 2004

Helical compression springs Hot coiled springs made from circular section bars

7906: Part 6: 1978

Helical compression springs Design and calculations for springs made from rectangular section bar-Steel

7906: Part 7:

1989

Helical compression springs Quality requirements. for cylindrical coil compression springs used mainly as vehicle suspension springs

7906: Part 8: 1989

Helical compression springs Method of inspection of hot coiled compression springs made from circular section bars

7907: Part 1: 2004

Helical extension springs Design and calculation

for springs made from circular section wire and bar

7907: Part 2: 1976

Helical extension springs Cold coiled springs made from circular section wire and bar

7907: Part 3: 1975

Helical extension springs Data sheet for specifications for springs made from circular section. wire and bar

7907: Part 4: 1987

Helical extension springs Selection of standard cold coiled springs made from circular section wire and bar

9484 : 1980

Centre bolts for leaf springs

9574 : 2004

Leaf springs assembly clips

1135:2018

Leaf springs assembly for automobiles

9801: 1981

Laminated springs for railway rolling stock

10876: 1984

Buckles for laminated springs for railway rolling stock

10878: Part 1: 1984

Flat form springs Design and calculation for springs made from rectangular cold-Rolled strips

10878 Part 2: 1984

Flat form springs. Springs made from rectangular cold-rolled strips

12511: Part 1: 2004

Springs Disc springs Design calculation

12511: Part 2: 2004

Springs-Dise spring

15453 :  2004

Spring Torsion bar springs

IS/ISO 2162 : Part 2: 1993

Technical product documentation Springs Presentation of data for cylindrical helical

compression springs

7001:2017

Springs Shot peening General procedures

7864: Part 1: 1975

Upholstery springs Conical type

7864: Part 2: 1979

Upholstery springs - Zigzag type

TEXTILES DEPARTMENT

86.

HDPE/PP Bags for Packing

9755:2021

Textiles High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers

11652:2017

Textiles High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 50 kg cement

12100: 1987

High density polyethylene (HDPE) woven sacks for packing flour

14252:2015

Textiles High density polyethylene (HDPE)

polypropylene (PP) woven sack for filling sand)

14887: 2014

Textiles High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 ke food grains

14968: 2015

Textiles High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 kg/25 kg sugar

16187: 2014

Textiles High density polyethylene (HDPE)/ polypropylene (PP) leno woven sacks for packaging and storage of fruits and vegetables

16208: 2015

Textile - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg food grams

16703:2017

Textiles High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 25 kg polymer materials

16709: 2017

Textiles Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg. cement

17279 : 2019

Textiles Polypropylene (PP) nouwoven sacks for packing bulk commodities

17399 : 2020

Textiles Polypropylene (PP) High density polyethylene (HDPE) laminated woven sacks for mail sorting, storage, transportation and distribution

87.

Protective Clothing for Industrial Workers and Fire Fighters

14744: 1999

Flame retardant protective hoods

15071:2002

Chemical protective clothing.

15742: 2007

Textiles Clothing made of limited flame spread. materials and material assemblies affording protection. agamst heat and flame

15748: 2007

Textiles Protective clothing for industrial workers exposed to heat (excluding firefighters' and welders" clothing)

15809 : 2017

High visibility warning clothes

16655 : 2017.

ISO 11611: 2015

Textiles Protective clothing for use in welding and allied processes

16874:2018

Textiles Protective gloves for firefighters

16890:2018

Textiles Protective clothing for firefighters

88.

Nets for Agriculture and Horticulture Purposes

16008 Part 1: 2016

Agro textiles Shade nets for agriculture and horticulture purposes Shade nets made from tape yarus

16008: Part 2 2016

Agro textiles Shade nets for agriculture and horticulture purposes Shade nets made from mono filament yarns

16513: 2016

Agro textiles. Insect nets for agriculture and horticulture purposes

17356:2020

Agro textiles Windshield nets for agriculture and horticulture purposes

17357:2020

Agro textiles Harvest nets for agriculture and horticulture purposes

17358 Part 1: 2020

Agro textiles Fencing nets for agriculture and horticulture purposes Fencing nets made from extruded polymer mesh

17358: Part 2: 2020

Agro textiles Fencing nets for agriculture and horticulture purposes Fencing nets made from mono filament yarns and combination of tape and mono filament yarns

17513: 2020

Agro textiles Plant support nets for agriculture and horticulture purposes

89.

Medical

Textiles for

Personal

Hygiene

5405:2019

Sanitary napkins

17508:2020

Disposable adult incontinence diaper

17509:2021

Disposable baby diaper

17514:2020

Reusable sanitary pad/sanitary napkin/ period panties

90.

Synthetic Fibre Ropes

4572:2014/ ISO 1140:2012

Fibre ropes Polyamide 3-4-8- and 12 strand ropes

5175: 2014/ISO 1346:2012

Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3)-3-, 4, 8-and 12 strand ropes

8674:2013/ ISO 1969: 2004

Fibre ropes Polyethylene 3 and 4-strand ropes

11066:2014/ ISO 1141 2012

Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes

12733 : 1989

Polyamide double braided rope

14928: 2001

Textiles-Composite synthetic fibre ropes

14929: 2001

Textiles-High strength polyolefins copolymer ropes

17608:2021/ ISO 10547: 2009

Polyester fibre ropes Double braid construction

17609: 2021/ ISO 10556

2009

Fibre ropes of polyester/polyolefin dual fibres

91.

Natural Fibre ropes

1084: 2005

Textiles Manila ropes

1321 : Part 1:2003

Sisal ropes Untarred varieties

1321 Part 2 : 1982

Sisal ropes Tarred varieties

1410 : 2019

Textiles Coir ropes

2452: 1985

Hawser-laid cotton rope

2453 : 1989

Cable-laid cotton rope

5176 1985

Hawser-laid hemp ropes

5177: 1985

Jute lines and ropes

PETROLEUM, COAL & RELATED PRODUCTS DEPARTMENT

92.

Reclaimed

Rubber

7490: 1997

Reclaimed rubber

93.

Rubber Hoses

444 : 2017

Rubber hoses, textile Reinforced, for general- purpose water applications

446 : 2017

Rubber hoses, textile Reinforced, for compressed air

635: 1982

Oil and solvent resistant hose of rubber

1677:2005

Rubber hoses for agricultural spraying

2396:2017/ ISO

Rubber hoses and hose assemblies for measured fuel dispensing

3549: 2017/ ISO  4641:2010

Rubber hoses and hose assemblies for water suction and discharge

5137-1990

Rubber hose for cement grouting

5797:2016/ ISO 1825:2010

Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling

5821: 1986

Hot-water hose of rubber

5894: 2018/ ISO 3861: 2005

Rubber hoses for sand and grit blasting

7654: 1987

Rubber hose for chemicals

8189: 1996/ ISO 1823: 2015

Rubber hose for on-shore oil suction and discharge services

9573: Part 1: 2017/ISO 928 : 2003

Rubber hose for liquefied petroleum gas (LPG) Industrial application

9573: Part 2: 2017/ISO 2928.

2003

Rubber hose for liquefied petroleum gas (LPG) - Domestic and commercial application

10655: 1999/ ISO 6134 :2017

Rubber steam hose

10660: 1983

Rubber hydraulic hose with textile reinforcement

10733: 1983

Electrically bonded road and rail tanker hose of rubber, resistant to petroleum products

10908 : 1991

Flexible rubber tubing for liquefied petroleum gas

11659: 1986/

ISO 577: 2008

Rubber hose for transferring anhydrous ammonia

12492 : 1988/ ISO 5774 : 2016

Thermoplastics hoses (textile reinforced) for compressed air

12585: 1988/ ISO 6224 : 2011

Thermoplastic hoses (textile reinforced) for water- General purpose

13071: 1991

Rubber hose, wire reinforced for sand and gravel suction and discharge services

15355 : 2018/

ISO 8789 : 2009

Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in motor vehicles

15355 : 2018/

ISO 8789 : 2009

Rubber hoses and hose assemblies for liquefied

petroleum gas (LPG) in motor vehicles

94.

Bitumen

73 : 2013

Paving bitumen

217 : 2018

Cutback bitumen

702: 1988

Industrial bitumen

3117:2004

Bitumen emulsion for roads and allied applications (anionic type)

8887 : 2018

Bitunen emulsion for roads (cationic type)

15462: 2019

Polymer modified bitumen (PMB)

15808: 2008

Multi-grade bitumen for use in pavement construction

17016-2018

Cationic modified bitunen emulsion.

17079: 2019

Rubber modified bitumen (RMB)

95.

Plastic Packaging for Food Products

10840: 1994

Blow moulded HDPE containers for packing of vanaspati

11352: 2018

Flexible pouches for the packing of vanaspati up to 2 kg or 2 litres

11805: 2007

Polyethylene pouches for packaging liquid milk

12724:2004

Flexible pouches for packing of refined edible oils up to 5 kg or 5 litre

12883: 1989

Polyvinyl chloride (PVC) bottles for edible oils

12887: 1989

Polyethylene terephthalate (PET) bottles for packaging of edible oils

14129: 1994

Flexible packaging materials for the packing of vanaspati in 10 kg and 15 kg packs

14537: 1998

Polyethylene terephthalate (PET) bottles for packaging of alcoholic liquors

14636: 1998

Flexible packaging materials for packaging of edible oils, ghee and vanaspati

14764: 2000

Polyethylene terephthalate (PET) containers for packaging of vanaspati

15473: 2004

Blow moulded HDPE contamers for packaging of edible oils

96.

Plastic Containers for Drinking water

8688: 1988

Plastics potable water bottles

15410: 2003

Containers for packaging of natural mineral water and packaged drinking water

15609: 2005

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water

97.

Plastic bags

9738:2003

Polyethylene bags for general purposes

12395: 1988

Disposable trash bags of plastics

98.

Plastic Tubes for Packaging

12007: 1987

Laminated collapsible tubes

17480 : 2020

High density polyethylene multi squeezable tube for packaging

 

Sheets and films for Agricultural use

14611: 2016

Multi-layered cross laminated sheets tarpaulins/ covers/agricultural films

17216: 2019

Polyethylene mulch films for agriculture and horticulture

SERVICE SECTOR DEPARTMENT-II

   100.

Piped Drinking Water Supply Service

17482:2020

Drinking water supply management system Requirements for piped drinking water supply service

     NOTE: The associated Indian Standards on other aspects such as raw material                                     standards, test method standards, code of practice, dimensions, processes etc. also need to be considered and covered while preparing the Guidance Documents


  Visit here: https://www.ornatequality.com/


Cokion

Cokion Private Limited is an Indian multinational technology company focusing on e-commerce, technology services, online advertising & marketing, headquartered in Bengaluru, Karnataka, India. It has its subsidiary, Cokion Inc., headquartered in Albany, New York, USA.

Welcome to Cokion com., the ultimate online shopping destination tailored for the diverse needs of consumers across the world. At Cokion.com, we pride ourselves on providing a seamless and enjoyable e-commerce experience, offering a wide range of products and services to meet the unique preferences of our customers.

Key Features:
Extensive Product Selection: Discover a vast array of products ranging from electronics and fashion to home goods and more. Cokion.com curates a diverse collection to cater to every aspect of your lifestyle.

User-Friendly Interface: Our intuitive and user-friendly platform ensures a smooth navigation experience. Effortlessly browse through categories, find detailed product information, and enjoy a hassle-free shopping journey.

Secure Transactions: Your security is our priority. Cokion.com employs state-of-the-art encryption and security measures to safeguard your personal information and facilitate secure transactions.

Fast and Reliable Delivery: Enjoy prompt and reliable delivery services across the world. Cokion.com. is committed to ensuring your purchases reach you in a timely manner, enhancing your overall satisfaction.

Responsive Customer Support: Our dedicated customer support team is ready to assist you with any inquiries or concerns. Reach out to us via various channels, and we'll strive to provide swift and effective solutions.

Exclusive Deals and Promotions: Benefit from exciting promotions, discounts, and exclusive deals regularly offered on Cokion.com. Save more while enjoying the quality and convenience of our e-commerce platform.

Mission Statement:
At Cokion.com, our mission is to redefine the online shopping experience for our customers. We aim to become the go-to destination for individuals seeking quality products, exceptional service, and a platform that understands and meets your evolving needs.

All categories
Flash Sale
Todays Deal